requirement – ps3 downgrade 3.42 USB Dongle , PS3 Downgrade Coupon that may be create onto your PS3 Jailbreak Device, Modified 3.41 PUP , LV2Diag.self (file 1) and LV2Diag.self (file 2)
Step 1 – Insert ps3 downgrade 3.42 e3 unit which is becoming reprogrammed as PS3 Downgrade into your console.
Step 2– Turn on console utilizing very same boot method as PS3 Jailbreak – Press energy then right away press eject. You will see your console turn with PS3 Jailbreak lit up with red/green gentle taken by eco-friendly only, Then it will turn off.
Step 3 – Turn on console to make certain you are in factory services mode. You will see a enormous red-colored box for the display saying Factory services Mode, after confirmed please turn away console and eradicate PS Downgrade Dongle
Step 4 – plan any blank usb with two data files , A) modified 3.41 pup B) Lv2Diag.self (file 1) These should be the only data files for the usb essential and should be positioned in spite of the reality that in the major listing inside the flash drive.
Step 5 – Insert this new Flash generate to the wonderful USB PORT of your console ( It should be positioned in spite of the reality that in the outermost wonderful port) and turn the console on. You will see dark display but you will see flashing lights for the console (yellow) and in your USB key .
Step 6 – wait around three mins for that method to set up the more mature FW, in the direction of the finish off the energy key for the console will start flashing eco-friendly after which your console will energy off.
Step 7 – eradicate the usb important and turn for the console , you will even now be in factory provider mode. Please confirm you have e3 card reader effectively to edition 3.41.
Step 8 (Optional) – if you actually need to downgrade to any more mature firmware you can not stick to activity 4,5,6 producing utilization of any normal firmware PUP. (You do not should use modified customized firmware now which you are on 3.41) .
Step 9 – Insert flash generate back again into PC , eradicate the PUP and Lv2Diag.self and set up only LV2Diag.self (file 2) for the USB Flash Drive Step 10 – energy in your console, subsequent 10 seconds it will energy off Step 11 – Turn in your console without any USB inserted as well as you can be away from factory provider mode into merchandising mode jointly with your selected firmware edition installed.